dtdg14gp transistors rev.a 1/2 1a / 60v digital transistor (with built-in resistor and zener diode) dtdg14gp z applications driver z features 1) high h fe . 300 (min.) (v ce / i c =2v / 0.5a) 2) low saturation voltage, (v ce(sat) =0.4v at i c / i b =500ma / 5ma) 3) built-in zener diode give s strong protection against reverse surge by l- load (an inductive load). z structure npn epitaxial planar silicon transistor (with built-in resistor and zener diode) z packaging specifications package packaging type taping mpt3 code dtdg14gp part no. t100 1000 basic ordering unit (pieces) z external dimensions (unit : mm) abbreviated symbol : e01 (1) base (2) collector (3) emitter rohm : mpt3 eiaj : sc-62 1.5 0.4 1.6 0.5 3.0 0.4 0.4 1.51.5 (3) (2) (1) 4.5 0.5 4.0 2.5 1.0 z equivalent circuit (1) (3) (2) r r=10k? (1) : base (2) : collector (3) : emitter z absolute maximum ratings (ta = 25 c) parameter v cbo v ceo p c tj 60 10 v v a c 60 10 v ebo v 5 1 i c w i cp 2 0.5 2 ?1 ?2 150 tstg c ?55 to + 150 symbol limits unit collector-base voltage collector-emitter voltage collector current collector power dissipation junction temperature emitter-base voltage storage temperature ?1 pw 10ms, duty cycle 1/2 ?2 when mounted on a 40 40 0.7 mm ceramic board. a
dtdg14gp transistors rev.a 2/2 z electrical characteristics (ta = 25 c) parameter symbol bv cbo bv ceo bv ebo i cbo i ebo h fe v ce (sat) f t r min. 50 50 5 ? 300 300 ?? ? 7 ? ? ? ? ? ? 80 10 70 70 ? 0.5 580 ? 0.4 ? ? 13 vi c =50a i c =1ma i e =720a v cb =40v v eb =4v v ce =2v, i c =500ma i c /i b =500ma/5ma v ce =5v, i e =?0.1a, f=30mhz ? v v a a ? v mhz k? typ. max. unit conditions ? characteristics of built-in transistor collector-base breakdown voltage collector-emitter breakdown voltage emitter-base breakdown voltage collector cutoff current emitter cutoff current dc current transfer ratio collector-emitter saturation voltage transition frequency emitter-base resistance z electrical characteristic curves 1 2 5 100m 200m 500m 10 20 50 10 0 10 5 2 1 500m 200m 100m 50m 20m 10m 5m 2m 1m collector current : i c (a) collector to emitter voltage : v ce (v ) i cp p w =100ms ? dc p w = 10ms? fig.1 safe operating area 14 w 18 l 0.8 t (unit : mm) when mounted on glass epoxy ? single pulse 10m 20m 50m 100m200m500m 1 2 5 1 0 10k 5k 2k 1k 500 200 100 50 20 10 ta=25c collector current : i c (a) fig.2 dc current gain vs. collecto r current dc current gain : h fe v ce =5v 2v 1v ta=25c 10m 10 5 2 1 500m 200m 100m 50m 20m 10m 20m 50m 100m 200m 500m 1 1 0 25 collector saturation voltage : v ce(sat) ( v) collector current : i c ( a) fig.3 collector-emitter saturation voltage vs. collector curren t 50 i c /i b =200 100
appendix appendix1-rev1.1 the products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. about export control order in japan products described herein are the objects of controlled goods in annex 1 (item 16) of export trade control order in japan. in case of export from japan, please confirm if it applies to "objective" criteria or an "informed" (by miti clause) on the basis of "catch all controls for non-proliferation of weapons of mass destruction.
|
